Grout mixing and pump test results were performed at ChemGrout using a specially instrumented size 6 progressing cavity grout pump.  Test batches were mixed using the manufacturer's recommended mix ratios, or the midpoint if a range was specified.  Prior to pump testing, all materials were subject to physical tests including sieve analysis, flow cone or slump testing, material temperature, water or polymer temperature, batch temperature.  In addition, other conditions were noted, such as mixing times, appearance of the mixed material, and ambient temperature and humidity.

The pumps recommended by the ChemGrout Pumpability Index® are considered to be the minimal pump required to successfully pump the specified material.  Desired production rates and pressures required by the application determine the correct mixer and pump size for a specific application and may be different from the recommended pump.

The following equipment is engineered and manufactured by ChemGrout:

GROUT PUMPS:
• Size 3, Size 4, Size 6 and Size 8 Progressing Cavity Pumps
• 2" and 3" Piston Pumps
• Plunger Pumps, Double Acting, High Pressure flow rates to 50 gpm, pressures to 2500 psi.
GROUT MIXERS:
• Paddle Mixers:   with 34, 45, 70, 100 or 130 Gallons Tanks
• 2X3X6 Colloidal Mix Pumps
• 2X3X12 Colloidal Mix Pumps
 GROUT AGITATORS:
• 100 to 600 Gallon Agitator Tanks
• Custom systems available upon request